Everyone knows that the die-casting profession is mainly due to the process of customized processing, so the following are the first steps for us to analyze the mold opening plan for the die-casting mould, for our reference.
The program process of die casting mould is as follows:
1. Technical analysis of die-casting pieces, including technical analysis of alloy, casting structure and die casting;
2, technical solution scheme, including parting surface, gate locations, pouring system, number of cavity, core pulling scheme and the number of ejection scheme, selection of die casting machine, die casting, etc to determine and set;
3. Pouring and discharging system scheme. Including technical parameter determination, internal gate standard calculation, casting system shape standard determination and the position standard calculation of the exhaust trough slag bag;
4. Die-casting mold structure plan. Includes block, cavity, core, top out, cooling water, heating pipes, etc.
5. Schematic diagram of die casting mould.
6. The plan of die casting mould parts.
Above all is the general process of die-casting mold cavity scheme, meanwhile open mold before the structure or appearance of the evalsuation is particularly important, so you don't forget to carefully assess preliminary plan to manufacture good products.
For more information on die casting, please visit http://www.harrellland.net/.