In order to obtain outstanding castings, it is necessary to strictly control die-casting skills in order to obtain outstanding castings. Die casting mould in our country has excellent sale situation, especially the new alloy die casting mould products. Now there are a lot of die-casting molds in our country that can produce very excellent new alloy die casting molds.
Clean: 1. Acknowledge the parts of the mold (thimble, needle), and the parts should be sent to the molds for repair in time.
2. Clean the mould with kerosene first to ensure the corners and other impurities such as aluminum slag that are easy to hide.
3. No doubt ask the mold parts to be hoisted to the curing area and seal the guide column, the cavity, the parting surface and the sliding parts of each part to spray anti-rust oil.
4. Blow dry mould with compressed air (admit that there is no moisture in the windpipe), especially ensure the travel switch on the tank, and the plug position is boring.
Die casting: 1, the optimization of die casting mould making, demand production factory strict manipulation of the die casting skills, then make sure that mould eligibility, in the process of die casting, to ensure injection die casting mould is always keep within certain limits of temperature, the temperature is cooling system and heating system to regulate and control, to ensure its thermal equilibrium in the process of production.
2, the planning of die casting mould making skills must follow the request and produce the corresponding skills, then make sure that all production mold is completely can be satisfied with practical application, so before the die-casting, make preparations for the corresponding requirements, such ability make sure all the die casting process can be order to continue. Preheat the die-casting molds before die casting.
The quality of aluminum alloy die casting is good. For more information on die casting molds, please visit http://www.harrellland.net/.